refactor config yaml into new files

input_numbers/batch.yaml

@@ -0,0 +1,7 @@
+batch_weight:
+  name: Batch Weight
+  unit_of_measurement: lb
+  min: 0
+  max: 45
+  step: 0.01
+  mode: box

input_numbers/jc.yaml

@@ -0,0 +1,34 @@
+jc_pecan_grade:
+  name: Pecan Size
+  min: 250
+  max: 1250
+  mode: box
+  step: 5
+  icon: mdi:peanut
+  unit_of_measurement: thou
+jc_crush_amount:
+  name: Crush Amount
+  min: 30
+  max: 120
+  step: 10
+  mode: box
+  unit_of_measurement: thou
+jc_hopper_angle:
+  name: Angle
+  min: 0
+  max: 90
+  step: 1
+  icon: mdi:angle-acute
+  unit_of_measurement: °
+jc_plate_frequency:
+  name: Impacting Plate Frequency
+  min: 30
+  max: 60
+  step: 1
+  unit_of_measurement: Hz
+jc_feeder_frequency:
+  name: Vibratory Feeder Frequency
+  min: 0
+  max: 100
+  step: 0.1
+  unit_of_measurement: "%"

input_numbers/meyer.yaml

@@ -0,0 +1,16 @@
+meyer_preload_stiffness:
+  name: Preload Spring Stiffness
+  min: 1800
+  max: 2200
+  mode: box
+  unit_of_measurement: N/m
+meyer_motor_speed:
+  name: Motor Speed
+  min: 30
+  max: 60
+  step: 1
+  unit_of_measurement: Hz
+meyer_screw_displacement:
+  name: Setscrew Displacement
+  min: -350
+  max: -290

input_numbers/moisture.yaml

@@ -0,0 +1,20 @@
+moisture_cold_soak_time:
+  name: Cold Soak Time
+  min: 0
+  max: 75
+  unit_of_measurement: hours
+moisture_hot_soak_time:
+  name: Hot Soak Time
+  min: 0
+  max: 45
+  unit_of_measurement: minutes
+moisture_ambient_temperature:
+  name: Ambient Temperature
+  min: 68
+  max: 74
+  unit_of_measurement: °F
+moisture_hot_bath_temperature:
+  name: Hot Soak Temperature
+  min: 180
+  max: 200
+  unit_of_measurement: °F

input_numbers/pid.yaml

@@ -0,0 +1,27 @@
+proportional:
+  name: Proportional
+  initial: 1
+  min: 0
+  max: 15
+  step: 0.01
+
+integral:
+  name: Integral
+  initial: 0
+  min: 0
+  max: 2
+  step: 0.001
+
+derivative:
+  name: Derivative
+  initial: 0
+  min: 0
+  max: 2
+  step: 0.001
+
+windup:
+  name: Windup
+  initial: 0
+  min: 0
+  max: 100
+  step: 1

input_numbers/sheller.yaml

@@ -0,0 +1,40 @@
+sheller_paddle_rpm:
+  name: Paddle Shaft RPM
+  min: 400
+  max: 800
+  step: 50
+  unit_of_measurement: RPM
+sheller_paddle_prev_rpm_error:
+  name: Paddle RPM Previous Error
+  min: -800
+  max: 800
+  step: 0.5
+  unit_of_measurement: RPM
+sheller_paddle_prev_adjustment:
+  name: Paddle RPM Previous Adjustment
+  min: -800
+  max: 800
+  step: 1
+sheller_drum_rpm:
+  name: Drum RPM
+  min: 25
+  max: 35
+  step: 5
+  unit_of_measurement: RPM
+sheller_drum_prev_rpm_error:
+  name: Drum RPM Previous Error
+  min: -35
+  max: 35
+  step: 0.1
+  unit_of_measurement: RPM
+sheller_drum_prev_adjustment:
+  name: Drum RPM Previous Adjustment
+  min: -35
+  max: 35
+  step: 0.01
+sheller_ring_gap:
+  name: Sheller Ring Gap
+  min: 0
+  max: 1.125
+  mode: box
+  unit_of_measurement: in