usda-vision/management-dashboard-web-app/API Documentations/docs/camera/CONVEYOR_CAMERA_CONFIG.md

Conveyor Camera (Camera2) Configuration

This document describes the default configuration for the conveyor camera (Camera2) based on the GigE camera settings from the dedicated software.

Camera Identification

• Camera Name: camera2 (Cracker-Cam)
• Machine Topic: vibratory_conveyor
• Purpose: Monitors the vibratory conveyor/cracker machine

Configuration Summary

Based on the camera settings screenshots, the following configuration has been applied to Camera2:

Color Processing Settings

• White Balance Mode: Manual (not Auto)
• Color Temperature: D65 (6500K)
• RGB Gain Values:
  • Red Gain: 1.01
  • Green Gain: 1.00
  • Blue Gain: 0.87
• Saturation: 100 (normal)

LUT (Look-Up Table) Settings

• Mode: Dynamically generated (not Preset or Custom)
• Gamma: 1.00 (100 in config units)
• Contrast: 100 (normal)

Graphic Processing Settings

• Sharpness Level: 0 (no sharpening applied)
• Noise Reduction:
  • Denoise2D: Disabled
  • Denoise3D: Disabled
• Rotation: Disabled
• Lens Distortion Correction: Disabled
• Dead Pixel Correction: Enabled
• Flat Fielding Correction: Disabled

Configuration Mapping

The screenshots show these key settings that have been mapped to the config.json:

Screenshot Setting	Config Parameter	Value	Notes
Manual White Balance	auto_white_balance	false	Manual WB mode
Color Temperature: D65	color_temperature_preset	6500	D65 = 6500K
Red Gain: 1.01	wb_red_gain	1.01	Manual RGB gain
Green Gain: 1.00	wb_green_gain	1.0	Manual RGB gain
Blue Gain: 0.87	wb_blue_gain	0.87	Manual RGB gain
Saturation: 100	saturation	100	Color saturation
Gamma: 1.00	gamma	100	Gamma correction
Contrast: 100	contrast	100	Image contrast
Sharpen Level: 0	sharpness	0	No sharpening
Denoise2D: Disabled	noise_filter_enabled	false	Basic noise filter off
Denoise3D: Disable	denoise_3d_enabled	false	Advanced denoising off

Current Configuration

The current config.json for camera2 includes:

{
  "name": "camera2",
  "machine_topic": "vibratory_conveyor",
  "storage_path": "/storage/camera2",
  "exposure_ms": 0.5,
  "gain": 0.3,
  "target_fps": 0,
  "enabled": true,
  "auto_start_recording_enabled": true,
  "auto_recording_max_retries": 3,
  "auto_recording_retry_delay_seconds": 2,
  "sharpness": 0,
  "contrast": 100,
  "saturation": 100,
  "gamma": 100,
  "noise_filter_enabled": false,
  "denoise_3d_enabled": false,
  "auto_white_balance": false,
  "color_temperature_preset": 6500,
  "wb_red_gain": 1.01,
  "wb_green_gain": 1.0,
  "wb_blue_gain": 0.87,
  "anti_flicker_enabled": false,
  "light_frequency": 1,
  "bit_depth": 8,
  "hdr_enabled": false,
  "hdr_gain_mode": 0
}

Key Differences from Camera1 (Blower Camera)

1. RGB Gain Tuning: Camera2 has custom RGB gains (R:1.01, G:1.00, B:0.87) vs Camera1's balanced gains (all 1.0)
2. Sharpness: Camera2 has sharpness disabled (0) vs Camera1's normal sharpness (100)
3. Exposure/Gain: Camera2 uses lower exposure (0.5ms) and gain (0.3x) vs Camera1's higher values (1.0ms, 3.5x)
4. Anti-Flicker: Camera2 has anti-flicker disabled vs Camera1's enabled anti-flicker

Notes

1. Custom White Balance: Camera2 uses manual white balance with custom RGB gains, suggesting specific lighting conditions or color correction requirements for the conveyor monitoring.

2. No Sharpening: Sharpness is set to 0, indicating the raw image quality is preferred without artificial enhancement.

3. Minimal Noise Reduction: Both 2D and 3D denoising are disabled, prioritizing image authenticity over noise reduction.

4. Dead Pixel Correction: Enabled to handle any defective pixels on the sensor.

5. Lower Sensitivity: The lower exposure and gain settings suggest better lighting conditions or different monitoring requirements compared to the blower camera.

Camera Preview Enhancement

Important Update: The camera preview/streaming functionality has been enhanced to apply all default configuration settings from config.json, ensuring that preview images match the quality and appearance of recorded videos.

What Changed

Previously, camera preview only applied basic settings (exposure, gain, trigger mode). Now, the preview applies the complete configuration including:

• Image Quality: Sharpness, contrast, gamma, saturation
• Color Processing: White balance mode, color temperature, RGB gains
• Advanced Settings: Anti-flicker, light frequency, HDR settings
• Noise Reduction: Filter and 3D denoising settings (where supported)

Benefits

1. WYSIWYG Preview: What you see in the preview is exactly what gets recorded
2. Accurate Color Representation: Manual white balance and RGB gains are applied to preview
3. Consistent Image Quality: Sharpness, contrast, and gamma settings match recording
4. Proper Exposure: Anti-flicker and lighting frequency settings are applied

Technical Implementation

The CameraStreamer class now includes the same comprehensive configuration methods as CameraRecorder:

• _configure_image_quality(): Applies sharpness, contrast, gamma, saturation
• _configure_color_settings(): Applies white balance mode, color temperature, RGB gains
• _configure_advanced_settings(): Applies anti-flicker, light frequency, HDR
• _configure_noise_reduction(): Applies noise filter settings

These methods are called during camera initialization for streaming, ensuring all config.json settings are applied.

Future Enhancements

Additional parameters that could be added to support all graphic processing features:

• rotation_angle: Image rotation (0, 90, 180, 270 degrees)
• lens_distortion_correction: Enable/disable lens distortion correction
• dead_pixel_correction: Enable/disable dead pixel correction
• flat_fielding_correction: Enable/disable flat fielding correction
• mirror_horizontal: Horizontal mirroring
• mirror_vertical: Vertical mirroring